Lcd Screen Indicators - Panasonic AG-CVF15G Bedienungsanleitung

Parts and their functions

LCD screen indicators

The screen shown below appears when the PIC.SIZE switch is set to AUTO.
The indicators are not displayed when the switch is set to FULL.
The error display 5 is displayed when an error occurs in the viewfinder, regardless of the PIC.SIZE switch
setting.
Note
What is displayed by the indicators on the screen depends on the camera used in combination
with the viewfinder. For details, refer to the operating instructions of the camera.
1 Green tally indicator
Lights up green when the green tally signal is received.
The conditions under which this indicator lights will differ depending on the camera settings.
2 TALLY/REC indicator
Lights up red while recording is underway or when the red tally signal is received.
It blinks red when trouble has occurred.
The conditions under which this indicator lights and blinks will differ depending on the camera settings.
3 ! indicator
The conditions under which the ! indicator lights can be set using the ! LED item of the menu of the
camera unit.
Use this indicator to avoid making operating errors during various operations, for instance.
• This indicator is not supported by the AG-HPX600.
4 BATT indicator
Indicates the status of the battery in the camera. The conditions under which this indicator lights and
blinks will differ depending on the camera settings.
5 Error display
Displayed when an error occurs in the viewfinder. If the problem is not resolved by turning off power to
the camera, stop using the viewfinder and consult your dealer.
HEATER ERROR :
SENSOR ERROR :
E-9
(continued)


D isplayed when an error occurs in the operation of the heater inside the
viewfinder.
D isplayed when an error occurs in the operation of the temperature sensor in the
viewfinder.
TALLY/REC
HEATER ERROR
BATT


