Adixen Sensistor H2000-P PLUS Benutzerhandbuch Seite 78

36 USER MANUAL HYDROGEN LEAK DETECTOR - H2000 PLUS
H2000 PLUS, H2000-C PLUS, H2000-P PLUS
GB
Environment
Temperature
Humidity
Serial port
Connector
Standard
Range and Linearity
Sensitivity in Leak Detection Mode
with Hand Probe H50
Measurement range in H
Analysis Mode
Linearity in H
(within 0.1 – 10 x calibration point)
Further specifications can be found in the Technical Manual.
2
Analysis Mode
2
Disposal of product when taken out of service
According to EU legislation, this product must be recovered for sepa-
ration of materials and may not be disposed of as unsorted municipal
waste.
If you wish you can return this Adixen Sensistor product to the
manufacturer for recovery.
The manufacturer has the right to refuse taking back products that are
inadequately packaged and thereby presents safety and/or health risks
to the staff.
The manufacturer will not reimburse you for the shipping cost.
Shipping address:
Adixen SensistorAB
Westmansgatan 49
582 16 Linköping
Sweden
®
0 - 50°C
10 - 90 % RH
9-pol D-sub male
RS232
-7
5 x 10 cc/s (when using 5% H
0.5 ppm – 0.2% H
2
Typ. ±15% (within 0.5 – 100 ppm)
tracer gas)
2