Herunterladen Inhalt Inhalt Diese Seite drucken

General - Adixen Sensistor H2000-P PLUS Benutzerhandbuch

Wasserstoff-lecksuchgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 84

1. General

H2000
PLUS
is an extremely sensitive and
selective detector for hydrogen gas (H
is especially designed for leak detection using
Hydrogen Tracer Gas, (Hydrogen diluted
with Nitrogen down to a safe concentration),
which is the most effective and economical
tracer gas for leak testing.
H2000
PLUS
detects hydrogen in air at
atmospheric pressure with no need for
vacuum pumping. It is especially suitable for
applications where high sensitivity and
selectivity is required in combination with
simplicity, reliability and low cost.
The instrument has two main functions:
Detection Mode and Analysis Mode.
Detection Mode is used when there is a need
to detect and locate a leak quickly. Analysis
Mode is used when there is a requirement to
analyse the concentration of hydrogen gas
in the air and thus determine the size of the
leak.
In Detection Mode, the results are shown as
a moving bar and in Analysis Mode by
figures in PPM or some other unit that the
user has selected. In both cases the results
are also indicated by an audio signal. The
USER MANUAL HYDROGEN LEAK DETECTOR - H2000 PLUS
frequency of the sound depends on the
measured signal, which allows the user to
). It
2
work without having visual contact with the
display.
H2000
powerful functions making it very easy to
integrate in a semi or fully automatic test
system. The functions range from output of
all necessary status signals and printer/
communication port to an advanced Active
Probe Control system (APC) making the
detector capable of controlling advanced
sample collecting devices down to simple test
fixtures. The details of the automation
functions are described in detail in the
Technical Manual.
The panel mount model, H2000-P
identical feature to the H2000
The battery operated model, H2000-C
has all the H2000
the APC system. This means that only passive
probes (e.g. Hand Probe H50) can be used.
This is due to power management control.
The battery can not support the current
needed to operate external probes.
is equipped with a number of
PLUS
features apart from
PLUS
®
3
GB
PLUS
, has
PLUS
PLUS
,

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis