Care And Maintenance; Handling Errors And Problems; Error Messages - Omron M10-IT Gebrauchsanweisung

HEM-7080IT-E.book 41 ページ ２０１１年１１月１４日 月曜日 午後１時５３分

Care and maintenance

5. Handling Errors and Problems

5.1

Error Messages

Error Display
Blinks or appears
continuously.
Cause
Cuff is under inflated.
Movement during
measurement.
Cuff over inflated.
Batteries have run down.
Movement, sound.
Cuff leaks air.
5. Handling Errors and Problems
Remedy
Carefully read and repeat the steps
listed under Chapter 3.3.
Replace all four "AA" batteries with
new ones.
Refer to Chapter 2.1.
Carefully read and repeat the steps
listed under Chapter 3.3.
Replace with a new cuff.
EN
41