Limited Warranty; Maintenance - Omron M2 Basic Gebrauchsanweisung

4. Limited Warranty

Thank you for buying an OMRON product. This product is constructed
of high quality materials and great care has been taken in its
manufacturing. It is designed to give you every satisfaction, provided
that it is properly operated and maintained as described in the
instruction manual.
This product is warranted by OMRON for a period of 3 years after the
date of purchase. The proper construction, workmanship and materials
of this product is warranted by OMRON. During this period of warranty
OMRON will, without charge for labour or parts, repair or replace the
defect product or any defective parts.
The warranty does not cover any of the following:
A. Transport costs and risks of transport.
B. Costs for repairs and / or defects resulting from repairs done by
unauthorised persons.
C. Periodic check-ups and maintenance.
D. Failure or wear of optional parts or other attachments other than
the main device itself, unless explicitly warranted above.
E. Costs arising due to non-acceptance of a claim (those will be
charged for).
F. Damages of any kind including personal caused accidentally or from
misuse.
G. Calibration service is not included within the warranty.
H. Optional parts have a one (1) year warranty from date of purchase.
Optional parts include, but are not limited to the following items:
cuff and cuff tube.
Should warranty service be required please apply to the dealer whom
the product was purchased from or an authorised OMRON distributor.
For the address refer to the product packaging / literature or to your
specialised retailer. If you have difficulties in finding OMRON customer
services, contact us for information:
www.omron-healthcare.com
Repair or replacement under the warranty does not give rise to any
extension or renewal of the warranty period.
The warranty will be granted only if the complete product is returned
together with the original invoice / cash ticket issued to the consumer
by the retailer.

5. Maintenance

5.1 Maintenance
To protect your monitor from damage, follow the directions below:
Changes or modifications not approved by the manufacturer will void
the user warranty.
Caution
DO NOT disassemble or attempt to repair this monitor or other
components. This may cause an inaccurate reading.
5.2 Storage
• Store your monitor and other components in a clean, safe location.
• Do not store your monitor and other components:
• If your monitor and other components are wet.
• In locations exposed to extreme temperatures, humidity, direct
sunlight, dust or corrosive vapors such as bleach.
• In locations exposed to vibrations or shocks.
5.3 Cleaning
• Do not use any abrasive or volatile cleaners.
• Use a soft dry cloth or a soft cloth moistened with mild (neutral)
detergent to clean your monitor and arm cuff, and then wipe them
with a dry cloth.
• Do not wash or immerse your monitor and arm cuff or other
components in water.
• Do not use gasoline, thinners or similar solvents to clean your
monitor and arm cuff or other components.
5.4 Calibration and Service
• The accuracy of this blood pressure monitor has been carefully
tested and is designed for a long service life.
• It is generally recommended to have the unit inspected every two
years to ensure correct functioning and accuracy. Please consult
your authorised OMRON dealer or the OMRON Customer Service at
the address given on the packaging or attached literature.
EN
EN6