Philips HQ7870 Bedienungsanleitung Seite 11

Troubleshooting
1
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see chapter 'Cleaning and
maintenance').
Cause 2: long hairs are obstructing the shaving
B
2
heads.
C
1
Open the shaving unit, turn the wheel anti-
clockwise (1) and remove the retaining frame
(2).
C
Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
Remove the hairs with the brush supplied.
Put the shaving heads back into the shaving
unit, put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: shaving heads are damaged or worn.
B
Remove the retaining frame.
Reduced shaving performance
ENGLISH
13