Mounting The Transmitter - Silvercrest SFKS 2 A1 Bedienungsanleitung

Mounting the transmitter

♦ Select a suitable positioning for the sender, close to
your outer door.
♦ Pierce the pre-stamped mounting holes
side of the mounting plate
♦ Mark the positions for the required drill holes with
the help of the mounting plate
for the supplied wall plugs
♦ Push the wall plugs into the drill holes and screw the
mounting plate
(see Fig. 3).
♦ Push the transmitter onto the mounting plate
it clicks audibly into place.
Fig. 3
SFKS 2 A1
with a pointed object.
(6 mm drill).
onto the wall using the screws
on the inner
and drill the holes
until
GB
MT
87