Agilent Technologies TwisTorr 84 FS AG X3508-64001 Bedienungshandbuch Seite 247

302 R N
320 Reserved to Agilent service
to 399
400 R A
402 R A
404 R A
500 Reserved to Agilent service
503 R/W N
504 R/W L
1. Automatic means that when the controller stops, the vent valve is opened
NOTE
with a delay defined by window n. 126; when the controller starts, the vent
valve is immediately closed.
2. On command means that the vent valve is opened or closed by means of
window n. 122.
Figure 28
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (D)
Pump life in hours (zeroed by the reset
command)
CRC EPROM (QE)
CRC Param. (PA)
CRC Parameter structure
RS 485 address
Serial type select
7 6 5 4
TOO HIGH LOAD
SHORT CIRCUIT
OVERVOLTAGE
AUX FAIL
Window N. 206 Bit Description
Technical Information
0 to 999999
QE8XXXX (where "XXXX"
are variable)
PA8XXXX (where "XXXX"
are variable)
"XXXX"
0 to 31 (default = 0)
0 = RS 232
1 = RS 485 (default = 0)
3 2 1 0
NO CONNECTION
PUMP OVERTEMP.
CONTROLL. OVERTEMP.
POWER FAIL
17
Examples
247/300