Agilent Technologies TwisTorr 84 FS AG X3508-64001 Bedienungshandbuch Seite 244

17 Technical Information
Examples
109 W
110 R/W
111 R/W
117 R/W
120 R/W
122 R/W
123 Reserved to Agilent service
124
125 R/W
126 R/W
130 Reserved to Agilent service
136 R/W
137 R/W
138 R/W
139 R/W
140 R/W
143 R/W
244/300
L Pump life/ cycle time/ cycle number
reset
L Interlock type (default = 0)
L Analog output type: output voltage signal
proportional to frequency, power,
temperature or pressure
N Low Speed frequency (Hz)
N Rotational frequency setting (Hz)
L Set vent valve on/off (on = closed)
L Set the vent valve operation
N Vent valve opening delay (expressed in 0.2
sec)
N Gauge Set Point Type
N Gauge Set Point Value (Hz, W, s)
N Gauge Set Point Mask (sec)
L Gauge Set Point Segnal Activation Type
N Gauge Set front Mysteresis (in % of R2
Valve)
N External Fan Configuration
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (D)
(default = 4)
To reset write '1'
Impulse = 0
Continuous = 1
0 = frequency
1 = power
(default = 1)
2 = Pump temperature
3 = Pressure
1100 to rotational frequency
setting (win 120) (default = 1100)
Low speed
frequency (win 117)
to 1350
(default = 1350)
On = 1
Off = 0 (default = 1)
Automatic = 0 (see note 1.)
On command = 1 (see note
2.)
(default = 0)
0 to 65535 (corresponding to
0 to 13107 sec)
0 = Freq
1 = Power
2 = Time
3 = Normal (default)
(default (867)
(default = 0)
0 = high level active (default)
1 = low level active
(default = 2)
0 = ON
1 = automatic
2 = serial
(default = 0)