Agilent Technologies TwisTorr 84 FS AG X3508-64001 Bedienungshandbuch Seite 217

All the logic output from the controller must be connected at J1
mating connector. The table 4 describes the signals available on
the connector.
The following figure shows a typical logic output connection of a
relay coil (other devices may be connected in the same way, e.g.
a LED, a computer, etc.) and the related simplified circuit of the
controller.
Figure 12
Figure 13
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (D)
> 1 KΩ
Digital Output Connection Example
1
> 10 KΩ
2
Analog Output Connection Example
Technical Information
Controller Connection
J 1
+24 V
17
217/300