Maintenance - BaByliss E700YTE Bedienungsanleitung

down the strand of hair to the
desired cutting length
- Cut to the desired length over
the comb or the fingers
- Comb often to check and to
clean off the cutted hair.

MAINTENANCE

Remove the cutting guide after
each use. A regular care of the
blades will maintain correct
performances of the clipper.
Detachable blades
The blades of this clipper are
removable for easy cleaning.
Hold the clipper with blade
frame pointing upwards and
push up to take the blade frame out.
Brush away the hair from the
blades with the cleaning brush.
Self-lubricating blades
The blades of your clipper are
provided with a reservoir pad
that provides the appropriate
amount of oil, use after use. Yet,
it is highly recommended to
recharge it periodically, as soon
as the clipper does not offer
optimal performances.
Detach the blades as indicated
above. Add a few drops of the
provided oil onto the teeth of the
blades. Replace the blades
back in place.
Never use any other product than
the one provided (Ref. 4700). This
oil was formulated for clippers, it
does not evaporate or slow
down the blades.
Replacement blades can be
purchased when your blades are
worn or damaged. Check with
your retailer.
Ni-Cd BATTERIES
This clipper contains Nickel-
Cadmium batteries.
To help protect our environment,
these batteries should be removed
for safe disposal at the end of
the clipper's life. To remove the
battery pack for disposal or
recycling, please follow the
below procedure:
1. First switch the clipper off and
unplug it. Take out the blades
and the 2 screws located
under the blade frame. Take
out also the screw located at
the back of the clipper body.
2. Open the appliance and
remove the batteries with
cutting pliers.
3. For environmental reasons,
do not discard the batteries
with your regular refuse.
Contact your local authorities
for more details on recycling
and safe disposal facilities in
7