SOLAC CE4553 Gebrauchsanleitung Seite 7

ENGLISH
DESCRIPTION
A Water Tank Lid
B Water tank
C Hot plate for warming cups
D Touch Screen
E1 Short Coffee Icon
E2 Long Coffee Icon
E3 Steam Icon
E4 Temperature Icon
E5 Double Coffee Icon
F ON/OFF Icon
G Steamer pipe
H Filter holder
I Measuring spoon
J 1 cup coffee filter (ground and POD)
K 2 cups coffee filter
L Supply cable
M Drip tray
N Drip tray grid
O Steam/Water Knob
P Silicone Tubes
R Water Tank Level
USE AND CARE:
Fully unroll the appliance's power cable before
•
each use.
Do not use the appliance if its accessories are
•
not properly fitted.
Do not switch the appliance on without water.
•
Do not use the appliance if the on/off switch
•
does not work.
Do not move the appliance while in use.
•
Respect the MAX and MIN levels.
•
Disconnect the appliance from the mains when
•
not in use and before undertaking any cleaning
task.
Unplug the appliance from the mains before
•
refilling the water tank.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not store the appliance if it is still hot.
•
Only use water with the appliance.
•
The use of bottled mineral water adapted for
•
human consumption is recommended.
Never leave the appliance connected and un-
•
attended if is not in use. This saves energy and
prolongs the life of the appliance.
Do not remove the filterholder when coffee is
•
being made, as at that time it is under pres-
sure.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all the product's packaging has
•
been removed.
Before using this product for the first time, it is
•
advisable to test it only with water.
Before using the product for the first time, clean
•
the parts that will come into contact with food in
the manner described in the cleaning section.
Before connecting the machine, check that
•
Steam/Water Knob (O) is closed (turning
clockwise).
FILLING WITH WATER:
The tank must be filled with water before turn-
•
ing the appliance on.
The tank (B) can be removed via the back of
•
the coffee maker or open the lid (A) and pour
the water in directly.
Fill the tank taking care to observe the MAX
•
level. Do not leave the water beneath MIN lev-
el.
Replace the tank in its housing, ensuring that it
•
is well fitted and be sure siicone tubes (P) are
well introduced in water tank.
BEFORE FIRST USE (PRIMING THE
CIRCUIT):
This simple operation ensures optimum dis-
•
pensing and must be carried out:
When first starting.
•
When the machine has been out of use for a
•
long time (1 or 2 weeks).
When the tank has run out of water.
•
Fill the receptacle taking care to observe the
•
MAX level .
Connect the appliance to the mains.
•
Push over the ON/OFF icon (F). The (E1 and
•
E2) pilots light will come flashing on and stop
flashing when it's reached the right tempera-
ture.
IMPORTANT: For the first startup, and in gen-
•
eral for this operation, it is not necessary to
wait for the machine to be hot.
Without fitting the filter holder (H) (or with the
•
filter holder fitted, but without coffee), place a
recipient under the steamer tube outlet.
EN