Operating Of The Unit - DynaVox VT-80 Bedienungsanleitung

Operation
Power switch
Volume Control
Start or stop the
playback
OPERATION OF THE UNIT
Button(s) Description
POWER The unit is switched on and off at the front panel. If the switch is
(1) in the off position, the unit is disconnected from the power supply.
When switched on, the red LED in the power switch lights up.
Before switching on, the volume setting (2) should be reduced as a
precaution.
VOLUME Turn the "VOLUME" knob clockwise to increase the volume and
(2) counterclockwise to decrease the volume. The volume setting
affects the signal level of the loudspeaker connections (19), the
headphone (9) and the pre-amplified signal output "PRE-OUT" (18).
(3)
Starts the playback of incomming digital music signals (USB/SD/BT)
or interrupt them.
50