Intended Use; Safety Information; Storage, Cleaning - Livarno Living 306272 Gebrauchsanweisung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions
for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Package contents/parts list
(Fig. A)
1 x seat (1)
ring for height adjustment (1a)
1 x safety gas spring (2)
protective cap (2a)
1 x foot (3)
1 x instructions for use
Technical data
Maximum load: 110kg
110
Dimensions: approx. 39 x 51.5–64.5cm (Ø x h)

Intended use

The item is not intended for commercial use. This
item has been developed for private indoor use.
Symbols used
Date of manufacture (month/year):
10/2018

Safety information

Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of
suffocation.
Risk of injury!
• Ensure the item is properly stabilised before
using it.
• Place the item on a level surface.
• The item may only be used under adult super-
vision and must not be used as a toy.
6 GB
• The item is not a toy or a climbing apparatus!
Ensure that persons, especially children, do
not pull themselves up on the item or lean
against it. The item may fall over.
• Check the item for damage and wear before
each use.
The item may only be used if it is in perfect
condition!
• Ensure that the item has been assembled
properly and in accordance with these
instructions for use. Improper assembly can
lead to injuries and impair the item's safety
and functionality.
• The safety gas spring may only be replaced
or repaired by trained specialist personnel.
• Never stand on the item.
Assembly (Fig. B)
Pull the protective cap (2a) off the safety gas
spring (2). Insert the safety gas spring (2)
into the foot (3) and the seat (1) with height
adjustment ring (1a) onto the safety gas spring
(2). Put the assembled item under strain to tightly
connect the parts together.
Adjusting the seat height
(Fig. C)
Raising the seat height
Stand next to the item and pull the height
adjustment ring (1a) up with one hand without
straining the seat (1).
Lowering the seat height
Sit on the item and pull up the height adjustment
ring (1a) with one hand.
Variable seating position
(Fig. D)
Sit on the item and bring it to the desired
position by shifting your weight.

Storage, cleaning

Always store the product in clean and dry con-
dition at room temperature. Only use water to
clean and wipe it dry with cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.