Specification; Key To Symbols And Safety Instructions; Symbol Explanation; Product Details - Bosch Gateway MB LAN 2 Installationsanleitung

18 | Contents
Contents
1

Key to symbols and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1.1 Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1.2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2

Product details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.1 Standard delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.2 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.3 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.2 Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.3 Connecting the BUS connections . . . . . . . . . . . . . . . . . . . . . . . . . 19
4 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5 Environmental protection/disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6 Operating status and faults overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1 Key to symbols and safety instructions
1.1 Key to symbols
Warnings
Warnings in this document are identified by a warning triangle
printed against a grey background.
Keywords at the start of a warning indicate the type and
seriousness of the ensuing risk if measures to prevent the risk are
not taken.
The following keywords are defined and can be used in this document:
• NOTE indicates a situation that could result in damage to property or equipment.
• CAUTION indicates a situation that could result in minor to medium injury.
• WARNING indicates a situation that could result in severe injury or death.
• DANGER indicates a situation that will result in severe injury or death.
Important information
This symbol indicates important information where there is no risk
to people or property.
Additional symbols
Symbol Explanation
▶ Step in an action sequence

Cross-reference to another part of the document
• List entry
- List entry (second level)
Table 1
1.2 Safety instructions
▶ Observe all country-specific regulations and standards during installation and
operation.
▶ Observe all instructions to ensure satisfactory operation.
▶ This product must only be installed and commissioned by an approved
contractor.
▶ Never install this product in wet rooms.
▶ Install and commission heat sources and other accessories according to the
relevant instructions.
6 720 805 490 (2016/08)
▶ Use this product exclusively in conjunction with the programming units and heat
sources listed. Observe connection diagram.
▶ Use the power supply unit provided to connect this product to the 230 V mains
supply.
About these instructions
These installation instructions contain important information regarding the safe and
proper installation, commissioning and maintenance of the product.
These installation instructions are intended for qualified contractors who, as a result
of their training and experience, are skilled in dealing with electrical installations and
heating systems.
2 Product details
To fully use all functions, Internet access is required. This may
incur additional costs.
Various Internet-based applications
smartphone app, can be used to control the system.
1) Certain functions may be subject to a fee; in-app purchases possible
The module fulfils the following functions:
• Interface between heating system and a network (LAN)
• Controlling and monitoring a system using a smartphone
The MB LAN 2 cannot be combined with a room temperature-
dependent controller.
• May be combined with the following:
- Heat sources with 2-wire BUS interface and controllers FW.../FR... from
FD 889 (09/2008) with 2-wire BUS interface, e.g. FW 200
- Modules for controllers FW.../FR... from FD 889 (09/2008), e.g. ISM2
- Heat sources with CR 400, CW 400 or CW 800 controllers
- Heat pumps with REGO1000 basic controller, V1.10 or later
- Heat pumps with HPC400 remote control
- Reverse compatible with Junkers products
- Bosch EasyRemote smartphone app
- Bosch Internet-Portal HomeCom und HomeCom Pro (you can find a current
heat source compatibility list on our website,  back page of these
instructions)
- Bosch Smart Home and KNX module
2.1 Standard delivery
Fig. 1, page 88:
[1] Module
[2] Plug-in power supply unit with connecting cable
[3] CAT 5 LAN cable
[4] Bag with installation parts
[5] Installation instructions
2.2

Specification

The design and operation of this product conforms to the European
Directives and the supplementary national requirements. Its
conformity is demonstrated by the CE designation.
The declaration of conformity for the product can be read on the Internet ( back
page).
Specifications
Dimensions (W × H × D) 151 × 184 × 61 mm (further dimensions
 Fig. 2, page 88)
Table 2
1) Connecting this module requires a router with available RJ45 socket.
2) To see which devices are supported, please go to our home page.
3) If available in your country.
1)
, such as the "EasyRemote"
1)
.
2)
3)
MB LAN 2