Installation Site Preparation; Safety Precautions - Palazzetti MULTIFIRE 45 ARIA Installations- Und Wartungsanleitungen

5 INSTALLATION SITE
PREPARATION
5.1 GENERAL INFORMATION
The following paragraphs provide instructions that
must be complied with in order to ensure maximum
The following instructions are however subordinate
to compliance with any national, regional and local
laws and standards in force in the country where
the product is installed.

5.2 SAFETY PRECAUTIONS

Responsibility for work carried out in the place
where the stove is installed lies with the user;
the user is also responsible for making sure the
installation checks are completed.
The user must abide by all local, national and
European safety requirements.
The stove assembly and dismantling instructions
are reserved exclusively for specialist technicians.
Users should always contact our service centre
technicians.
Before having work performed by other technical
personnel verify
competence. Before starting to assemble or
dismantle the stove, the installer must heed the
A) Do not work in adverse conditions;
B)
for working and make sure that personal
protective equipment is in perfectly working
order;
C) Always wear safety gloves;
D) Always wear safety shoes;
E) Always use electrically insulated tools;
F) Make sure that the area being used for
assembly and dismantling is clear of any
obstacles.
5.3 STOVE INSTALLATION SITE
The enclosed "Product technical details" show the
minimum clearances from combustible materials
and objects expressed in centimetres that must
halved.
to excessive heat.
wood, parquet, linoleum, laminates or carpets
base underneath stove.
INTRODUCTION
their effective technical
004775230 12/2016
The manufacturer declines all liability for any
alterations to the characteristics of the material
base.
Any elements made from wood (e.g. beams) or
other combustible material located near the stove
Flammable walls or objects must be at least 120
cm away from the heat radiation area at the front
of the stove.
Leave enough clearance for maintenance work.
materials is observed, as shown on the pipes used
23