Prcd; Maintenance Of The Unit; Cleaning Of The Unit - FRIGOGLASS Easyreach Benutzerhandbuch

5.

PRCD*

The PRCD device is integrated to the power cord of the unit, close to the wall plug.
The PRCD device features two buttons; the small one is the "test" button and is used to check the
operational status of the PRCD. The bigger button is the "reset" and is used to rearm the PRCD after a
triggering event.
When plugging off the power cord a test needs to be perfomred to ensure proper operation of the
PRCD. Please follow the steps below:
Step 1: Plug into power.
Step 2: Press (small) "TEST" button. The (big) "RESET" button should pop-up.
Step 3: Press the "RESET" button again. Do not use the device if it fails!
6.

Maintenance of the unit

This chapter includes some simple instructions that will ensure proper operation and appearance of
the unit.
6.1

Cleaning of the Unit

It is important to clean the unit twice a year. In order to avoid mould formation, smells, etc., the product
compartments must be thoroughly cleaned. For cleaning the unit's external plastic parts, use a light
*
optional feature
BEFORE PROCEEDING IN ANY CLEANING OR MAINTENANCE
PROCEDURE, UNPLUG THE ICM!
CONTAINS FLAMMABLE REFRIGERANT
ENG
TEST button
RESET button
21