sylvac ISP091201D Bedienungsanleitung Seite 16

10. Favourite key
E
The «favourite» key gives direct access to a predefined function, and can be configured according to the needs of the
user. In order to assign a function to the «favourite» key, give a prolonged press on
function :
0 dAtA
1 HoLd
2 CLr 0 dAtA
1 HoLd 3 SEt
2 CLr
Validation of selection: By a prolonged press on
Note : a function can also be assigned via RS232 using the command <FCT + Function No.>
3 SEt
example : Change of Unit = <FCT4>
Data transmission
4 Unit
(default)
6 PrE
Hold display
Re-initialise Min-
7 ModE 4 Unit
Max-Delta
Zero reset
6 PrE 8 toL
Diameter calibration
(min.-max. mode)
7 ModE
8 toL
mm – IN
Recall Preset
Nor–Min–Max-Delta
Tol ON–Tol OFF
16
, and then select the required
0.01 – 0.001 or
9 rES
0.001 – 0.0001
Measurement
10 dir
sense, positive -
negative
9 rES 11 Mul
Multiplier
12 bt
10 dir
Bluetooth
®