Introductory Information; Legal Notices; Safety Precautions - HP Designjet 3D Removal System Einführende Informationen

Introductory Information

Other sources of information
A complete user guide to your system is available on the web (http://www.hp.com/go/3dprinter/
knowledgecenter). The user guide provides information on the following topics:
• Unpacking, inspecting and installing
• Warranty information
• Understanding the system
• Control Functions
• Maintaining the system
• Troubleshooting
• Technical specifications
• Technical support

Legal notices

© 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express
warranty statement accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.

Safety precautions

The following precautions ensure the proper use of the HP Designjet 3D Removal System and prevent the
system from being damaged. Follow these precautions at all times.
• To avoid the risk of falling, the system must be placed on a flat and stable surface able to support 36 kg
(80 lbs.).
• Use the power supply voltage specified on the nameplate. Avoid overloading the system's electrical
outlet with multiple devices.
• Ensure the system is well-grounded. Failure to ground the system may result in electrical shock, fire and
susceptibility to electromagnetic interference.
• Use only the power cord supplied with the system. Do not damage, cut or repair the power cord. A
damaged power cord has risk of fire and electric shock. Replace a damaged power cord with an
approved power cord.
• Do not allow metal or liquids to touch the internal parts of the system. Doing so may cause damage,
fire, electric shock or other serious hazards.
• Power off the system and disconnect the power cord from the power outlet in any of the following cases:
• If there is smoke or an unusual smell coming from the system.
• If there is an unusual noise not heard during normal operation.
• A piece of metal or a liquid touches the internal parts of the system.
• During an electrical (thunder/lightning) storm.
• During a power failure.
1