Herunterladen Diese Seite drucken

Selecting A Program; Switching Massage Areas On And Off; Switching The Heating On And Off; Cleaning And Maintenance - ULTIMATE SPEED UAMM 12 B2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für UAMM 12 B2:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
2. To switch off the device before 30 min-
utes have passed, press the POWER 1
button again.
6.2

Selecting a program

There are a total of 5 programs available.
The device always starts in the program AU-
TOMATIC. The programs differ in their inten-
sity and the massage rhythm.
1. During operation, press the MODE 4
button to switch to the next program.
The LED next to the active program is lit
green.
2. Press the MODE 4 button again to
switch to the next program.
NOTE: in the selected programs, you can
use the buttons 5 to switch the motors in in-
dividual massage areas on and off, the
INTENSITY 3 button can be used to deter-
mine general intensity, and the HEAT 2 but-
ton can be used to add the heating function.
6.3
Switching massage
areas on and off
Each of the 4 massage areas (NECK,
BACK, LUMBAR, THIGHS) can be
switched on and off individually.
• During operation, press one of the 4
buttons 5 to switch the corresponding
motor on or off.
The LED next to the active area is lit red.
If an area is not active, the LED is off.
6.4
Switching the heating
on and off
1. Press the HEAT 2 button to switch on
the heating function.
The red LED next to HEAT is lit.
The massage mat is now heated from
inside.
2. Press the HEAT 2 button again to
switch off the heating function.
The red LED next to HEAT goes out.
NOTE: you can use the buttons 5 to switch
off all motors. Then, only the heating func-
tion is active.
7. Cleaning and main-
tenance
7.1

Cleaning the appliance

To ensure your product gives you lasting ser-
vice, you should clean it regularly.
!
DANGER
ger of an electric shock or
damage!
Always disconnect the power supply be-
fore cleaning.
Never immerse the machine in water.
Never allow water or cleaning agent to
run into the machine.
CAUTION:
Never use caustic or abrasive cleaning
agents, as they could damage the parts.
1. Unplug the power plug 12 from the
power socket 11.
2. Clean the massage mat 6 with a
clothes brush.
3. If badly soiled, clean the massage
mat 6 as well as the remote control 10
with a damp cloth. You could also use
a little mild washing-up liquid.
4. Wipe off with clean water.
5. Do not use the appliance again until it
is fully dry.
To avoid the dan-
GB
7

Werbung

loading