Beta RR 480 Bedienungsanleitung Seite 119

• Tighten the cap to the completely ex-
tended leg.
• Insert the legs into the plates. Once the
leg has been positioned at the desired
extension, tighten screws E at 17Nm and
f at 12Nm, after the screws have been
greased.
• Apply the wheel complete with spacers,
pin and cap C, which will be tightened to
50Nm. Tighten the screws d to 10Nm.
Apply the brake caliper and apply thread-
lock of average intensity onto screws B.
Tighten to 35Nm.
Apply the cable gland U-bolt and tighten
the screws a to 1.5 Nm.
E
f
1,5Nm
d
10Nm
C
47
17Nm
12Nm
a
50Nm
35Nm
B
3
GB