OHAUS TD52 Serie Bedienungsanleitung Seite 6

EN-4
5. Connect the relay cable to the 3 pin and 6 pin connectors. Fix the relay cable with the
nylon cable tie to avoid falling off from the terminal block.
6. Put the interface option cover back on the terminal.
For TD52XW:
1. Remove the interface option cover. Remove the 6 screws with sealed washers. Remove
the M25 hole plug as shown.
3 Pin / 6 Pin Connector
Nylon cable ties
Relay Cable
Screw
Load cell cable male
connector
M25 Hole plug