Interface Installation - OHAUS TD52 Serie Bedienungsanleitung

EN-2

INTERFACE INSTALLATION

CAUTION: THE INSTALLATION AND WIRE CONNECTIONS TO THE DISCRETE I/O
BOARD SHOULD ONLY BE DONE BY AUTHORIZED AND QUALIFIED
PERSONNEL, SUCH AS AN ELECTRICIAN.
WARNING: BEFORE MAKING CONNECTIONS TO THE RELAY TERMINALS,
POWER OFF THE SYSTEM AND REMOVE ALL EXTERNAL AC POWER
CONNECTIONS.
WARNING: WHEN MAKING ANY LINE VOLTAGE CONNECTIONS TO THE
DISCRETE I/O, FOLLOW NATIONAL ELECTRICAL CODE (NEC) OR LOCAL
AUTHORITY WIRING STANDARDS AND SAFETY PRACTICES.
For TD52P:
1. Separate the indicator from the base by loosening load cell cable male connector.
Remove the interface option cover.
2. Break off the rib of the accessory cover as shown.
Interface option cover
Load cell cable male connector
Rib