Sony NSR-S10 Installationsanleitung Seite 24

Humidity range for storage: 20% to 90%
relative humidity (maximum
wet-bulb temperature 35 °C/95
°F, no condensation)
Power and miscellaneous
Power: 12 V DC
Current consumption: Max. 4.0 A
AC adapter: 100-240 V AC to 50/60 Hz
Dimensions: 245 × 53 × 160 mm
3 ⁄
(9
4
excluding protrusions)
Weight: approximately 1.4 kg (3.1 lb.)
(including 0.6 kg (1.3 lb.) for
HDD)
Supplied accessories
AC adapter (1)
SATA cable (1) (only for models without
internal HDDs)
SATA power cable (1) (only for models
without internal HDDs)
Cable clamp (1)
Infrared remote control unit (1)
Installation Manual (this manual) (1)
CD-ROM (First Step Guide, User's Guide)
(1)
Warranty booklet (1)
Design and specifications are subject to
change without notice.
24 Specifications
⁄
1 3 ⁄
× 2 × 6 in.) (W/H/D,
8 8
Notes
• Always make a test recording, and
verify that it was recorded
successfully.
SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR
REIMBURSEMENT ON ACCOUNT
OF FAILURE OF THIS UNIT OR ITS
RECORDING MEDIA, EXTERNAL
STORAGE SYSTEMS OR ANY
OTHER MEDIA OR STORAGE
SYSTEMS TO RECORD CONTENT
OF ANY TYPE.
• Always verify that the unit is operating
properly before use. SONY WILL NOT
BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.