Sony NSR-S10 Installationsanleitung Seite 19

Cameras connected to the same segment on the network are automatically located and
registered to the NSR, and images from these cameras appear on the "Main" screen.
Screen example: NSR-S10
Continuous recording starts automatically after the cameras are registered.
Notes
• Only Sony cameras will be located and registered.
• Only cameras with IP address settings that have not been changed from factory default
conditions will be located and registered. To register cameras with IP addresses that
have been changed, return the camera IP address settings to default conditions and
restart the NSR.
• When there are multiple cameras connected, the cameras are registered in the order in
which they are located, and up to 4 cameras can be registered for NSR-S10 and up to
8 cameras for NSR-S20.
This completes connections.
You can now refer to the First Step Guide (PDF) to perform operation verification and
other setup operations.
Caution
When connecting to an existing network, be sure to refer to the First Step Guide (PDF).
Important
You can download the latest firmware for NSR-S10/S20 from the following URL.
For the firmware update procedure, refer to the User's Guide (PDF).
http://www.sony.co.jp/Products/NSR/NSR-S.zip
Turning on the power and registering the cameras 19