Inhaltsverzeichnis; Specifications - Hach CD300 Benutzerhandbuch

Table of contents
Specifications on page 3
General information on page 4
Installation on page 8
User interface and navigation
Startup on page 20
Legal information
Manufacturer: TriOS Mess- und Datentechnik GmbH
Distributor: Hach Lange GmbH
The translation of the manual is approved by the manufacturer.

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Weight
Enclosure
Operating temperature
Storage temperature
Relative humidity
Power requirements
Power consumption
Measurement
Memory
Communications
Communications protocol Modbus RTU: RTU client, configurable parameters (default: 9600-8-N-1)
Network connection
Relays
Outputs
Input/output switch
Cleaning
Compliance information
Warranty
on page 19
Details
150 × 80 × 139 mm (5.9 × 3.1 × 5.5 in.)
1.6 kg (3.53 lb)
IP65 die-cast aluminium alloy housing; Front panel: acrylic glass (PMMA)
0 to 40 °C (-4 to 140 °F)
-20 to 70 °C (-4 to 158 °F)
0 to 95%, non-condensing
85-265 VAC, 50/60 Hz; 10-15 VDC ± 5%
2 W (40 W maximum)
Two M12 connectors for optical sensors
Internal 2 GB Micro SD card
RS232, RS485
Modbus TCP: TCP server, configurable TCP port (default: 502)
Ethernet, RJ-45 connector, protocol: TCP/IP, Modbus TCP, VNC
One relay changeover contact (SPDT), 250 VAC, 2 A; 30 VDC, 2 A; Wire gauge:
2
2.5 mm (14 AWG) maximum
Two 4-20 mA configurable analog outputs; Load: 500 Ω maximum; Wire gauge:
2
1.5 mm (16 AWG) maximum
Control voltage: 12 VDC ± 5%; Wire gauge: 2.5 mm
Opional compressed air valve for cleaning
CE mark
1 year (EU: 2 years)
Operation on page 21
Maintenance on page 22
Troubleshooting on page 23
Accessories on page 24
2
(14 AWG) maximum
English 3