Maunfeld MLP 12S Bedienungsanleitung Seite 96

OPERATION INSTRUCTIONS
TURNING ON THE DISHWASHER FOR THE FIRST TIME
RINSE AID DISPENSER REGULATION
A certain amount of rinsing liquid is used during the last rinse. As with the
detergent, the amount of rinse aid depends on the hardness of the water in your
area.
Too much of the rinse aid will cause excessive foam formation and stains on
your dishes. If the water in your area of residence is soft, you do not need a rinse
aid.
ATTENTION! NEVER USE DETERGENTS FOR HAND DISHWASHING!
www.maunfeld.com
There are 6 dispenser operation modes. Be sure
to start by setting the switch to position "1". If the
dishes dry out badly and there are traces of drops
on it, increase the amount of rinse aid by moving
the pointer to position "2". Move to the position
with a larger number as long as no traces remain
on your dishes.
-32-