Maunfeld MLP 12S Bedienungsanleitung Seite 81

PREPARING FOR INSTALLATION
CONNECTING DRAIN HOSES
In order to avoid accumulation of water at the bottom of the chamber at the
end of the washing, the installation of drain hoses should be carried out
taking into account recommendations on the length, height and bend angle
of the hoses.
Insert the drain hose into the drain pipe of a minimum diameter of 40 mm,
use the plastic holder that comes in the set. The upper part of the hose
should be at a height of 40 to 100 cm, but always above the level of the drain
so that the waste water does not flow into the machine (Fig. 6).
(A) (B)
Please place the drain hose in one of the ways or .
FIGURE 6
-17-
www.maunfeld.com