Maunfeld MLP 12S Bedienungsanleitung Seite 90

OPERATION INSTRUCTIONS
TURNING ON THE DISHWASHER FOR THE FIRST TIME
Before using the dishwasher for the first time:
A.
Install a water softener,
B.
Fill the salt container with half a liter of water, then fill the container
completely with salt,
C.
Pour the rinse aid into the container,
D.
Add the detergent.
WATER SOFTENER
There are two ways to soften the water: use a water softener or use a special
detergent. In different areas, water has a different degree of hardness. If hard
water is used in the dishwasher, it can result in the formation of deposits and
stains on the dishes. The appliance is equipped with a special softener that
uses salt designed to remove lime and minerals from the water.
SALT CONSUMPTION REGULATION
In the dishwasher, it is possible to regulate the salt consumption depending on
the hardness of the water.
1) Open the door, turn on the machine.
2) To regulate the softener, press and hold the "Program" button (5) for 5
seconds. This operation is carried out in the 1st minute after starting the
machine (the indicators of the level of salt and rinse aid will flash
periodically).
3) Press the "Programs" button, select the desired value in accordance with
the type of water. Sequence: H1-> H2-> H3-> H4-> H5-> H6
4) Press the "Power" button (6) to complete the installation.
www.maunfeld.com
-26-