Maunfeld MLP 12S Bedienungsanleitung Seite 89

DISHWASHER INSTALLATION
RECOMMENDATION FOR CONNECTION
HOW TO DRAIN EXCESS WATER FROM THE DRAIN HOSE
If the drain hose is located at a level above 1 meter from the floor, then excess
water cannot be drained independently. Water can be drained into a suitable
container that is installed below the drain level.
INCREASING THE LENGTH OF THE DRAIN HOSE
Use the same drain hose. Its length should not exceed 4 meters, otherwise the
efficiency of the machine will be reduced and at the end of the washing there
will be water in the chamber. The drain hose length included is 125 cm.
TURNING ON THE DISHWASHER
Before the first start of the dishwasher, ensure that:
1. The dishwasher is properly installed
2. Water supply tap is open
3. There are no water leaks at the drain and filling hose connections
4. Power cord is properly connected
5. Power on
6. There is no bending on the drain and filling hoses.
7. All packaging and printing materials are removed from the machine.
After installation, save the manual, it may be useful to you in the future.
-25-
www.maunfeld.com