Maunfeld MLP 12S Bedienungsanleitung Seite 93

OPERATION INSTRUCTIONS
TURNING ON THE DISHWASHER FOR THE FIRST TIME
The salt container is located under the lower grid and must be filled in the
following order:
a. Take out the bottom basket, then unscrew and remove the cover of the salt
container.
b. If you fill the container for the first time, fill it with water for 2/3 of its
volume (approximately 500 ml).
c. Insert the end of the funnel (supplied) into the hole and add approximately
1.5 kg of salt. This is normal if a little water comes out of the salt container.
d. If grains of salt remain on the cover or neck of the container, they should
be removed to avoid damage to the gasket on the cover. Screw the cover
tight.
ATTENTION! SALT CONTAINER SHOULD BE FILLED WHEN THE WARNING
INDICATOR LIGHTS UP.
FILLING THE RINSE AID DISPENSER
Rinse aid is used in the last stage to prevent the formation of traces of drops
on the dishes. In addition, it improves drying efficiency.
www.maunfeld.com
-29-