Maunfeld MLP 12S Bedienungsanleitung Seite 82

DISHWASHER INSTALLATION
INSTALLING THE APPLIANCE IN A NICHE
1. Attach a decorative facade to the door of the dishwasher using the supplied
clamps. An example of the clamp mounting is given in the Figure (Fig. 4b).
2. Adjust the dishwasher door spring tension by tightening the left and right
springs with a hex wrench in a clockwise direction. Failure to comply with this
clause may damage the door of the dishwasher (Fig.5).
3. Connect the cold water supply hose.
4. Connect the drain hose (Fig. 6).
5. Connect the power cable.
6. Glue the waterproof strip under the tabletop. Make sure that the strip is
fixed flush with the tabletop. (Fig.7). It is necessary to protect the tabletop
from moisture and steam.
FIGURE 7
www.maunfeld.com
-18-