Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION INSTRUCTIONS
STARTING WASHING PROGRAMS
STARTING WASHING CYCLE
1. Pull out the lower and upper basket, load the dishes, and then slide the
basket back. It is recommended to load the lower basket first and then the
upper one.
2. Add the detergent.
3. Plug in the power cord. The power supply must correspond to 220-
240V/50Hz, the specification of the outlet is 10A 250V AC.
4. Make sure that the water supply is turned on completely.
5. Open the door, press the "ON" button, the indicator will light up.
6. Using the program selection button, select the wash program. The
indicator corresponding to the selected program lights up.
7. Close the door. The machine will start the operation.
CHANGE OF WASHING PROGRAMS
1. The washing program should be changed if the machine has worked for a
short time. Otherwise, the detergent may already be used, and the water
required for the cycle is already drained. If so, you need to add detergents.
2. Open the door a little to stop the washing cycle, press and hold the button
for the selected program for at least 3 seconds to cancel it. Choose another
washing program. Close the door, the machine will continue to work after 10
seconds.
www.maunfeld.com
-45-
Werbung
Inhaltsverzeichnis
