Maunfeld MLP 12S Bedienungsanleitung Seite 94

OPERATION INSTRUCTIONS
TURNING ON THE DISHWASHER FOR THE FIRST TIME
WHEN YOU SHOULD FILL THE RINSE AID DISPENSER RINSER AGAIN.
When you are running out of the rinse aid, an indicator lights up on the control
panel. You can calculate the required amount of the rinse aid as follows. The
dispenser has a black rinse aid level indicator.
The less fluid there is, the smaller the point of the indicator becomes. The level
should not be reduced to less than 1/4.
As the rinse is used up, the size of the black point of the indicator changes in
accordance with the illustration.
Full
3/ 4
1 / 2
1 / 4 Must be refilled
Empty
www.maunfeld.com
-30-