Setting The Printable Area - Rimage Everest Benutzerhandbuch

Setting the printable area

This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm
media. This allows you to set the outer and inner diameters to print the disc label without
overlapping the disc edges.
Tip: Most discs like the one
shown above have the
following printable areas:
Standard Area
Outer Diameter 118 mm
Inner Diameter 38 mm
Hub Area
Outer Diameter 35 mm
Inner Diameter 24 mm
Tip: Most discs like the one
shown above have the
following printable areas:
Outer Diameter 118 mm
Inner Diameter 24 mm
110632_L
1. Navigate to printing preferences (refer to page 10).
2. Select the Advanced tab.
3. View or change the printing preferences.
a. To print on the disc hub, in the Printable Area pane,
select Print on Hub.
b. To modify the printable area, select Modify. The
Printable Area Settings window opens.
c. In the Standard Settings pane, enter:
•
The desired outer diameter
•
The desired inner diameter
d. To print on a disc with a stacking ring, in the Hub
Settings pane, enter:
•
The desired outer diameter
•
The desired inner diameter
e. To apply the settings, select OK.
f. To close the window without applying the settings,
select Cancel.
4. When you have made the desired choices, select Apply.
5. To close the Preferences window, select OK.
Operate the Everest printer
13