Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; In The Event Of Scale Deposits - Silvercrest SWKG 3000 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SWKG 3000 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33
Warning
Remove the power plug from the wall socket before
you take the kettle from the base
causing a potential short circuit by water possibly
spilling out of the carafe and falling onto live electrical
connections in the base
Injury hazard
For safety reasons, the lid
while the water is boiling or is very hot. There is a
risk of receiving severe scalds.

Cleaning and Care

Danger
Do not open any part of the housing. There are no
user-servicable elements inside. An open housing
can create the risk of a lethal electrical shock.
Never submerse any parts of the appliance in
water or other liquids! This can create the risk
of a life-threatening electrical shock if residual
liquid comes into contact with powered com-
ponents.
Before cleaning the appliance, ....
• first, remove the plug from the power socket and
allow the appliance to cool down completely.
• Clean the exterior surfaces and the power cable
with a slightly damp cloth. Be sure to dry the
appliance well before taking it back into use.
• Never use detergents, abrasive cleaners or
solvents. These can damage the appliance.

In the event of scale deposits:

• Before descaling, remove the pourer sieve (see
chapter "Removing/replacing the pouring sieve").
• Obtain any decalcifying agent suitable for kitchen
utensils (e.g. decalcifiers for coffee machines)
from a hardware shop. Proceed as detailed in the
instructions provided for the use of the decalcfying
agent.
y
. This prevents
y
.
w
should not be opened
• For cleaning the stainless steel container bottom
you can use a suitable product from a specialist
dealer .
Removing the lid
To make the cleaning of the appliance interior easier,
you can remove the lid
• Open the lid
• Press the lid
q
the rear
.
• You can then pull out the hinge and lift out the
w
lid
, as shown in the diagramme
• On reassembly, ensure that the lid
the correct way round. The thickening at the frame
w
of the lid
replaced, and also the level surface of the frame
to the handle
be closed!
q
u
w
- 4 -
w
:
w
.
w
, as shown in the diagramme, to
must point upwards when it is being
r
. Otherwise, the lid
w
.
w
is put in
w
cannot

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis