Installation - OHAUS Valor 2000 Serie Bedienungsanleitung

Valor 2000 Series Scales
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
TM
Valor 2000 Series Scales. Please read the manual completely before using the
scale.
1.1 Safety Precautions
Please follow these safety precautions:
• Verify that the AC Adapter input voltage matches the local AC power supply.
• Do not immerse the scale in water or other liquids.
• Do not operate the scale in hostile environments.
• Do not drop loads on the platform.
• Do not place the scale upside down on the pan.
• Service should only be performed by authorized personnel
• Disconnect the scale from the power supply when cleaning
1.2 Controls
Figure 1-1. Controls.
Figure 1-2. Rear Display.
EN-1 EN-2
TABLE 1-1. CONTROL FUNCTIONS.
Button
Primary Function ON/ 0/T
(Short Press) Turns scale ON.
If scale is On:
Sets zero.
Performs a tare operation.
Secondary Off
Function Turns scale off.
(Long Press)
Menu Function Yes
(Short Press)
Accepts the current setting on
the display.

2. INSTALLATION

2.1 Package Contents
•
Scale
•
Pan
•
Power Adapter
•
Instruction Manual
•
Warranty Card
2.2 Location
Use the scale on a firm, steady surface. Avoid locations with excessive air current,
vibrations, heat sources, or rapid temperature changes. Adjust the leveling feet so
the bubble is centered in the circle.
Valor 2000 Series Scales
UNITS
Changes the weighing Unit.
Menu
Enter the User menu.
No
Advances to the next menu or
menu item.
Rejects the current setting on
the display and advances to
the next available setting.