Playback; Audio Playback - Sony SVT-124P Bedienungsanleitung

Playback

3
1
2
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Select the playback speed by pressing TAPE
SPEED.
The selected playback speed is displayed in the
display window.
4
Press PLAY z.
Playback starts.
To stop playback
Press STOP p.
To rewind the tape
Press STOP p and then REW 0.
To fast-forward the tape
Press STOP p and then FF ).
Note
You may not play back the tapes recorded on other
time-lapse VCR on this VCR and vice versa.
26
REW 4 FF STOP p
0 )

Audio Playback

You can play back the sound in 3-, 12-, or 24-hour
mode.
Play back the tape at the same speed at which it was
recorded so that you can monitor the sound normally.
For audio playback in 3-hour mode
Play back the tape normally.
For audio playback in 12-hour or 24-hour
mode
Press MENU/AUDIO ON in playback mode.
"A12" or "A24" is displayed in the display window.
To turn off the sound, press MENU/AUDIO ON again.
MENU/AUDIO ON
Note
Noise appears on the screen when you play back the
sound in 12- or 24-hour mode.
Playback speed
You can view the playback picture at one of the
following speeds.
Recording
3
speed(H)
3
1
12
5
24
9
For example, when a tape recorded in 24-hour mode is
played back in 3-hour mode, you can view the
playback picture at a speed 9 times faster than the
recorded one.
Playback speed (H)
12 24
1/5 1/9
1 5/9
7/5 1