Changing The Display Position Of The Time/Date Display - Sony SVT-124P Bedienungsanleitung

Setting the Clock
Changing the Display Position of
the Time/Date Display
You can change the position of the time/date display
that appears on the monitor screen.
1
Turn on the power of the equipment to be used.
The normal display appears.
1 5 - 1 0 - 9 7 W E D 0 0 0
1 5 : 2 0 : 0 0 1 2
2
Change the display position as follows.
To move the display downwards, press SHIFT v.
(When the display reaches the bottom of the
screen, the display returns to the top of the screen.)
To move the display rightwards, press SHIFT b.
(When the display reaches the right-hand edge of
the screen, the display returns to the left-hand edge
of the screen.)
1 5 - 1 0 - 9 7 W E D 0 0 0
1 5 : 2 0 : 0 0 1 2
Note
While recording, this function does not work.
To turn off or on the screen display
Set the ON SCREEN switch to OFF or ON.
12
Date
Alarm count
Recording/
playback speed
Time
Press SHIFT b.
Press SHIFT v.