Connections; Outline; Power Supply - Sony CMA-D3 Bedienungsanleitung

Connections

Outline

Applicable cameras
You can connect the following Sony video camera to the
unit.
• 3CCD color video camera DXC-390/390P
Usable camera cables
The following camera cables can be used to connect the unit
to a video camera.
• CCMC-3MZ (12-pin, D-sub 9-pin, mini DIN 8-pin and
BNC y 26-pin) (CCZZ-1E cable adaptor supplied)
• CCZ-A2/A5/A10/A25/A50/A100 (26-pin y 26-pin)
Set the CABLE COMP selector on the front panel to the
appropriate position according to the camera cable length.
100m
75
50
25
0
CABLE COMP
10
(GB)
Cable length Selector setting
10 m or less
0
Approx. 25 m
25
Approx. 50 m
50
Approx. 75 m
75
Approx. 100 m 100
Notes
• If your cable length is not indicated in the table, set the
selector to the position for a closer length. Do not use a
cable of more than 100 m.
• For DC operation, the usable cable length is limited by the
supplied voltage. If you use the camera cable of 50 m or
longer, connect a 11.5 to 15 V DC power supply.

Power supply

The unit operates on either AC or DC power supply.
AC power
Connect the AC power cord (supplied) to an AC outlet and
set the DC/AC SELECT switch on the rear panel to AC IN
(right position). You can turn on and off the unit with the
POWER switch on the front panel.
DC power
Connect a DC external power source to the DC 15V IN
connector and set the DC/AC SELECT switch on the rear
panel to DC 15V IN (left position).
The power indicator lights when power is supplied to the
DC 15V IN connector. (The POWER switch on this unit
does not operate.)