Adjustment; Cleaning And Maintenance; Guarantee - Waeco ECL-102 Montage- Und Bedienungsanleitung

ECL-76, ECL-102, ECL-103
8

Adjustment

A
NOTICE!
The following work must be carried out with caution and only by persons with
the necessary skills and knowledge. This is because incorrect adjustment of
the cut-in and cut-off voltages can cause the air conditioner to malfunction
and/or cause the vehicle's electrical system to fail.
I
NOTE
The voltage scale shown on the charging current distributor is a guide. If differ-
ent values are set, these must be checked using a suitable voltage measure-
ment device. An externally adjustable laboratory power supply can be
connected to terminals GND and D+ for this purpose.
➤ Insert the screwdriver into the axis of the potentiometer (fig. p, page 28). Turning the
axis clockwise increases the voltage threshold value, turning it anti-clockwise reduces
the voltage threshold value.
I
NOTE
Due to information presently available, we do not recommend a cut-off voltage
less than 11.5 V/23 V.
9

Cleaning and maintenance

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these may
damage the product.
➤ Occasionally clean the product with a damp cloth.
10

Guarantee

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when you
send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
EN
Adjustment
113