Herunterladen Inhalt Inhalt Diese Seite drucken

Dc-Kit3/Dc-Kit5 With Dometic Freshwell3000; Dc-Kit4/Dc-Kit6 With Dometic B2600 - Waeco ECL-102 Montage- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ECL-76, ECL-102, ECL-103
➤ Connect both the wires on the universal connection cable (item no. 4441300124) to the
two wires on the on/off cable of the FreshJet1100/1700/2200 or FreshLight1600/2200.
7.9

DC-Kit3/DC-Kit5 with Dometic FreshWell3000

 Roof air conditioner: FreshWell3000
 Circuit diagram: fig. c, page 15 (12 V), fig. i, page 21 (24 V)
 Charging current distributor: ECL-102/ECL-103
 Inverter: SinePower MSI2312T/MSI2324T
➤ Install inverter remote control MCR9 in an easily-accessible place (jumper closed, refer
to remote control installation manual) and connect its cable to the inverter.
➤ Connect the wire sleeves of the universal connection cable to contacts I5 and I2 on the
charging current distributor.
➤ Connect the on/off cable of the FreshWell3000 to the connection socket on the
connector panel (fig. v, page 31).
I
NOTE
Guide the on/off cable carefully past the fan.
➤ Connect both the wires on the universal connection cable (4441300124) to the two
wires on the on/off cable of the FreshWell3000.
7.10

DC-Kit4/DC-Kit6 with Dometic B2600

 Roof air conditioner: Dometic B2600
 Circuit diagram: fig. j, page 22 (12 V), fig. m, page 25 (24 V)
 Charging current distributor: ECL-102/ECL-103
 Inverter: SinePower MSI2312T/MSI2324T
➤ Install inverter remote control MCR9 in an easily-accessible place (jumper closed, refer
to remote control installation manual) and connect its cable to the inverter.
➤ Remove the B2600's outlet panel, if necessary remove the upper cover.
➤ Connect the wire sleeves of the universal connection cable to contacts I5 and I2 on the
charging current distributor.
➤ Join the on/off cable of the B2600 (item no. 4441300129) to the plug connector on the
circuit board (fig. t, page 30).
I
NOTE
Guide the on/off cable carefully past the fan.
➤ Connect both the wires on the universal connection cable (4441300124) to the two
wires on the on/off cable of the B2600.
EN
Connection
111

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis