Casualplay KUDU 4 Anweisungen Seite 25

• Put the parking brake on.
Prima, Prima Fix, Baby 0+, Newmoon, Metropol, Sono or Nuno
• Place the
pushchair, facing backwards.
• Line the fasteners of the
and Nuno
, up with the slots.
• Press downwards until it clicks into place and a green signal appears in each of the
windows on the sides of the fasteners (fig.23).
• To remove it, press and then release the red button on both fasteners (window displays
red signal) and pull upwards to release it from the chassis of the pushchair (fig.24).
Fitting/Removing the harness (diagram 25)
• Pass the buckles of the harness through the vents in the seat and the mattress pad.
NOTE: take care when fitting the harness to make sure that the straps are not twisted.
• For the harness to be fitted, position the harness on the seat of the Kudu 4, so that the
buckle is facing upwards.
• Insert the crotch strap through the mattress pad and the seat.
• Do the same with the two abdominal straps and the two chest straps.
• The chest straps can be placed in 3 different positions, depending on the child's height.
The chest straps should be positioned at the height of the child's shoulders and both
straps should be at the same level.
Fitting/removing the mattress pad (diagram 26)
• Unfasten the 6 press studs on the back of the backrest.
• Then unfasten the 4 side studs and the 4 studs underneath the seat.
• Lastly, pass the harness buckles through the openings in the seat and the mattress
pad.
• To fit the mattress pad follow the same steps in reverse, fitting the harness last.
NOTE: take care when fitting the harness to make sure that the straps are not
twisted.
Prima, Prima Fix, Baby 0+, Newmoon, Metropol, Sono
, on the
23