Troubleshooting; Warranty - Levita S 1400 Bedienungsanleitung

15. Troubleshooting

Errors
The motor is not rotating a) Power supply is missing
Insufficient output power of
the motor
Inaccurate scarifying
The motor is running but
the roller is not rotating
Important note!
For protection of the motor, this equipment is equipped with a thermal fuse in the motor winding that
switches off the equipment in the case of overload. The equipment will start again after it has cooled
down sufficiently.

16. Warranty

The warranty rules issued by our company or the importer apply to every country. As part of the
warranty, we remedy malfunctions on your appliance free of charge provided that this malfunction is
caused by a material or manufacturing defect. In the event of a warranty claim, please turn to your
dealer or the nearest branch office with the purchase receipt.
Potential causes
b) Defective cable
c) Defective ON/OFF switch
d) Interrupted connection with
the motor or capacitor
e) Obstructed equipment
casing
a) The soil is too hard
b) Obstructed equipment
casing
c) Heavily worn roller
a) Heavily worn roller
b) Incorrect scarifying depth
a) The driving belt is worn out
Remedy
Check the socket and the safety lock
Check the cable
Have the equipment repaired by a
specialist service provider
Have the equipment repaired by a
specialist service provider
If necessary, set the scarifying depth.
Clean the casing to allow the roller to
move freely.
Adjust the scarifying depth
Clean the casing
Replace the roller
Replace the roller
Adjust the scarifying depth
Have the driving belt replaced by a
specialist service provider
39 / 52