Troubleshooting; Warranty - Levita LM 32K Bedienungsanleitung

To replace the blade:
◆ Using heavy-duty gloves, grip the blade.
◆ Place the blade (1) on the pins on the fan hub and insert the blade bolt into the hole in the shaft.
Note: When fitting the blade, the blade flaps must be facing the inside of mower.
◆ Use the correct spanner to securely tight the blade bolt by turning the spanner clockwise.
◆ Tighten the blade bolt as firmly as possible by hand. Bolt tightening torque: 20 Nm.
c) Maintenance

There are no parts inside the equipment which require additional maintenance.
d) Ordering replacement parts:
Please quote the following data when ordering replacement parts:

Model, type and serial number of the machine (see name plate)

Part description
e) Spare parts
P/N ............................. Description
SF7A113-20 ................ Blade LM 32 K
SF7A102-27 ................ Blade LM 32 A

9. Troubleshooting

If your appliance seems not to operate properly, follow the instructions below. If this does not solve
the problem, please contact us.
Problem Possible Cause
Power turned off
Machine
fails
Grass too long
to operate
Height of cut too low
Cutting blade blunt
Machine
Underside of machine
ragged
clogged
Blade fitted upside down
10. Disposal
Protect the environment! This electrical equipment may not be disposed of with general/
household waste. Used electrical equipment is needed to deliver the collection system,
dealing with environmental waste disposal.

11. Warranty

The warranty rules issued by our company or the importer apply to every country. As part of the
warranty, we remedy malfunctions on your appliance free of charge provided that this malfunction is
caused by a material or manufacturing defect. In the event of a warranty claim, please turn to your
dealer or the nearest branch office with the purchase receipt.
Possible Solution
Turn power on
Increase the height of
cut and move machine
to shorter grass to start
Increase height of cut
Replace the blade
Check underneath the machine and clear out as
necessary (always wear heavy duty gloves)
Refit blade correctly
23 / 30