Intended Use - Hilti SFE 2-A12 Original Bedienungsanleitung

3 Description
3.1 Product overview
1/4" hex socket
@
Torque and drilling mode se-
;
lector ring
Gear speed selection switch
=
Forward/reverse selector
%
switch with safety lock
Grip
&

3.2 Intended use

The product described is a hand-held cordless drill / driver for driving and
removing screws, drilling in metal, wood and plastic. The product has an
interchangeable chuck and can be fitted with various adapters.
• Use only Hilti Li-ion batteries of the B 12 series with this product.
• Use only Hilti-approved battery chargers to charge these batteries. More
information is available from your Hilti Store or from: www.hilti.group
3.3 Items supplied
Drill / driver, operating instructions
Other system products approved for use with this product can be found
at your local Hilti Store or online at: www.hilti.group
3.4 Charge status display
The charge status of the Li­ion battery is displayed after pressing the release
button.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes, the power tool is in
working order.
Battery charge status cannot be displayed while the control switch is
pressed.
24 English
Printed: 07.08.2019 | Doc-Nr: PUB / 5507949 / 000 / 00
1
(
)
+
§
/
:
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
Fitting slot for accessories
(fig.: Belt hook)
Lamp
Charge status display
Battery release button
Control switch (with electronic
speed control)
Adapter
2236948
*2236948*