Panasonic AJ-RC10G Bedienungsanleitung Seite 10

Parts and functions
Basic camera operations
!5"
!4"
!1" USER MAIN button
This button has the same function as the
USER MAIN switch on the camera recorder.
The lamp is on only when the button is
pressed.
<Note>
Functions assigned to the USER MAIN
button are selected in the menu of the
camera recorder or the unit.
!2" USER1 button
This button has the same function as the
USER1 switch on the camera recorder. The
lamp is on only when the button is pressed.
<Note>
Functions assigned to the USER1 button
are selected in the menu of the camera
recorder or the unit.
!3" USER2 button
This button has the same function as the
USER2 switch on the camera recorder. The
lamp is on only when the button is pressed.
<Note>
Functions assigned to the USER2 button
are selected in the menu of the camera
recorder or the unit.
E-9
(Continued)
!1"
H
!7" !6" !8"
!2" !3"
!4" PRE/A/B button
Operations of this button are the same as
for the WHITE BAL switch on the camera
recorder to select PRE, A or B.
The state will switch to "PRE" # "A" # "B"
# "PRE" step by step every time the button
is pressed.
When the power is turned on, the unit is in
the state it was before turning off the power.
!5" PRE/A/B display
This displays the WHITE BAL selection on
the camera recorder using P/A/b
!6" FILTER ND/CC button
This switches the FILTER display on the CC/
ND display !7" between ND filter and the CC
filter alternately.
!7" CC/ND Display
This displays the ND or CC selection using
the FILTER ND/CC !6" button.
For the ND filter display, the filter position is
indicated with 1/2/3/4.
For the CC filter display, the filter position is
indicated with A/b/C/d.
For the single filter, filter switching is
disabled. 1/2/3/4 is displayed depending on
the filter position.
When the power is on, the ND filter position
is displayed.
!8" BAR ON/OFF button
This button switches the output from the
camera recorder between the color bar and
the camera signals.
When the output from the camera recorder
is the color bar, the lamp is on; otherwise, it
is off.
When the power is turned on, the unit is in
the state it was before turning off the power.