Getting Started; Unpacking; Inserting Batteries Into The Remote - Sony CVM-BDM Bedienungsanleitung

Getting Started

Unpacking

Check that you have the following items:
• Subwoofer (1)
• Satellite speakers (5)
• Speaker cords (3 m × 3, 8 m × 2)
• Optical digital cord (1) (North American, Mexican, and Asian models only)
• Coaxial digital cord (1) (European models only)
• Remote commander (remote) RM-BE1 (1)
• Size AA (R6) batteries (2)

Inserting batteries into the remote

You can control the system using the supplied remote. Insert two size AA (R6) batteries by
matching the + and – on the batteries. When using the remote, point it at the remote sensor
on the system.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
GB
5