Presentation; Warranty; Maintenance; Storage And Transportation Conditions - CefarCompex Physio 5 Bedienungsanleitung

III PRESENTATION

1 - Warranty

This warranty is valid only if
accompanied by proof of purchase. Your
legal rights are not affected by this
warranty.
Your CefarCompex Physio5 stimulator is
guaranteed for a period of 2 years from
the date of purchase. The warranty
covers the stimulator (material and
workmanship) but not the battery unit,
cables, charger, electrodes or motor
point pen. All defects arising from
substandard material or workmanship are
covered. The warranty does not cover
damage resulting from impact, accident,
improper use, insufficient protection
against damp, immersion in water, or
repair work conducted by unauthorized
personnel.

2 - Maintenance

Clean with a soft cloth and an alcohol-
based, solvent-free cleaning product.
Use only a minimum amount of liquid
when cleaning the unit.
Do not disassemble the stimulator
or charger as these all contain high-
voltage components that could cause
electric shock. This may only be done
by persons or repair services authorized
by CefarCompex.
Your stimulator does not require
calibration. If your stimulator
contains parts that seem worn or
defective, please contact your nearest
CefarCompex customer service centre.
3 - Storage and
transportation conditions
The Physio5 contains rechargeable
batteries and so the storage and
transportation conditions must not
exceed the following figures:
• Storage and transportation
temperature: -20°C to 45°C
• Maximum relative humidity: 75%
• Atmospheric pressure: 700 hPa to
1060 hPa

4 - Usage conditions

• Temperature: 0°C to 40°C
• Relative humidity: 30% to 75%
• Atmospheric pressure: 700 hPa
to 1060 hPa.
• Do not use in an explosion risk area.

5 - Elimination

Batteries must be disposed in compliance
with relevant national regulatory
requirements.
Any products bearing the WEEE marking
(a crossed-out wheeled bin) must be
separated from ordinary household waste
and sent to special collection facilities
for recycling and recovery.

6 - Standards

The CefarCompex Physio5 is designed for
use by health professionals and as such
complies with relevant medical standards
and regulatory requirements.
To guarantee your safety, the
CefarCompex Physio5 has been designed,
manufactured, and distributed in
compliance with the requirements of
the European Directive 93/42/EEC on
medical devices.
The CefarCompex Physio5 also complies
with the IEC 60601-1 standard on
general safety requirements for
medical electrical devices, the IEC
60601-1-2 standard on electromagnetic
compatibility, and the IEC 60601-
2-10 standard on particular safety
requirements for nerve and muscle
stimulators.
Current international standards require
that a warning be given concerning the
application of electrodes to the thorax
(increased risk of cardiac fibrillation).
The CefarCompex Physio5 also complies
with Directive 2002/96/EEC on waste
electrical and electronic equipment
(WEEE).
ENG
4