Troubleshooting - CefarCompex Physio 5 Bedienungsanleitung

8 - Troubleshooting

Electrode or cable error
The Physio5 will beep and alternately
display a pair of electrodes and an
arrow pointing to the channel where the
problem was detected. In the example
below, the stimulator has detected an
error in channel 2.
The electrode error message can mean
that:
• There are no electrodes connected to
this channel.
• The electrodes are old, worn, and/
or the contact is poor: try using new
electrodes.
• The electrode cable is faulty: try
connecting it to another channel. If the
problem persists, replace the cable.
If for any reason your device seems
to present a malfunction other than
those presented above, please contact
CefarCompex customer service.
ENG
16